
X-Sense SD19-W Interconnected Smoke Detector, 6-Pack – 10-Year Sealed Battery, Wireless Link+ Photoelectric Smoke Alarm (Connects Up to 18 Alarms), No Wiring, ETL Listed to UL 217
X-Sense SD19-W 6-pack wireless interconnected smoke alarms: one alarm sounds all, 10-year sealed battery, photoelectric sensing, ETL listed to UL 217, no wiring.
In a house fire, the alarm that reaches you first is only useful if the rest of the house hears it too: a detector in the basement does little for someone asleep two floors above. These interconnected smoke alarms solve that without any wiring. They link wirelessly, so when any one alarm detects smoke, every connected alarm in the system sounds, which helps alert you in bedrooms, hallways, living areas, and on other floors. You can link up to 18 compatible X-Sense Link+ alarms (including the SC07-W, SC01-W, and SC06-W), so a six-pack is a good start for a typical multi-level home, and you can add more later. An optional X-Sense remote makes testing and silencing connected alarms easier.
A sealed 10-year lithium battery powers each alarm for its full operating life, so there are no battery swaps and none of the 2 a.m. low-battery chirps. The alarms use photoelectric sensing, which is less prone to nuisance alarms from cooking fumes and steam, and they’re ETL listed to the UL 217 safety standard for smoke alarms. Installation takes minutes with a screwdriver and no electrician, using the included brackets and a simple pairing step, and each unit has a self-test feature and a one-button test/silence. Please note that these are smoke alarms only (they do not detect carbon monoxide), so add CO alarms where needed. Test them monthly, install them according to the manufacturer’s instructions and local fire-code guidance, and replace each alarm at the end of its 10-year life.